40 Gbps DPDT RF MEMS Switch
MM5600
This is a DPDT switch for high-speed differential signal switching. The MM5600 is based on Menlo Micro's Ideal Switch technology and can operate up to 40 Gbps for digital signaling applications, or high-performance RF applications up to 20 GHz. The MM5600 has low insertion loss, fast switching speed, internal ESD diodes, and can operate with greater than three billion switching cycles.
The MM5600’s integrated driver is controlled by a serial-to-parallel interface that drives the high voltage gate lines of the switches. The design also offers two separate single- ended ports and a considerable 90% reduction in size when compared with comparable EM relay solutions. An external +5 VDC logic supply and high voltage +89 VDC bias source is required for operation of the internal switch driver.
Bright Toward serves as Menlo Micro's technical support and distributor in Asia. Please contact us for more information.
Features
- Ideal Switch® Technology provided by Menlo Micro
- DC to 20 GHz range, up to 40 Gbps
- DPDT
- Insertion Loss (Single-Ended mode) 1.3dB @ 10GHz
- Linearity IP3 77 dBm
- Isolation (Single-Ended mode) 24dB @ 10 GHz
- High Reliability: Greater than 3 billion switching operations
- ESD Protection up to 500V
Contact Form
- DPDT (MEMS Switch)
Frequency
- DC to 20 GHz range, up to 40 Gbps
Load Voltage (V)
- 150
Load Current (A)
- 0.1
On Resistance (Ω)
- 1.2
Insertion Loss
- 1.3dB@ 10GHz [Single-Ended mode]
Return Loss
- 11dB @ 10GHz [Single-Ended mode]
Isolation
- 24dB @10GHz [Single-Ended mode]
ESD Protection
- 500V
MM5600’s performance at 32 Gbps (not de-embedded)
This eye diagram shows MM5600’s performance at 32Gbps (RF connectors and RF traces are not de-embedded)
MM5600’s contact resistance over 10 million operational cycles at 85°C
The below graph shows MM5600’s contact resistance variation over 10 million operational cycles at 85°C
MM5600’s contact resistance over 10 million operational cycles at 25°C
The below graph shows MM5600’s contact resistance variation over 10 million operational cycles at 25°C
MM5600 Phase Noise Performance
Ultra low phase noise and jitter: -140dBc@1 MHz offset; <20fs jitter/ Measured on the R&S Signal Analyzer with Phase Noise Option
MM5600: High-Speed Dual DPDT Loopback test Board
This circuit utilizes two MM5600 differential switches configured in a dual DPDT configuration with loopback. This setup supports up to 40 Gbps data rates to meet the fastest PCIe Gen. 5 requirements. This board design is optimized for low-loss RF performance.
Application
- Differential High-Speed Switching
- ATE-Device Interface Boards
- High-Speed Computer Peripheral Interfaces
- Related Products
-
8 GHz SP4T micro-mechanical RF MEMS Switch
MM5140
This high-power SP4T RF MEMS switch enables highly reliable switches capable of greater than...
Details Add to ListDC to 18 GHz, SP4T RF MEMS Switch
MM5120
This is a high-frequency (DC to 18GHz) SP4T micro-mechanical RF MEMS Switch. It is a highly...
Details Add to List5V to 90V Booster IC
MD05-90
This is a Booster IC with a 5V input; it outputs a 90V high-voltage driving force. This IC is designed...
Details Add to List16 GHz SP4T micro-mechanical RF MEMS Switch (ESD Enhanced)
M4AG
This is a High power SP4T micro-mechanical RF MEMS Switch (Length*Width*Height: 5.8*5.8*1.9mm)....
Details Add to List8 GHz DPDT micro-mechanical RF MEMS Switch (ESD Enhanced) with Loopback
M2CG
This is a High power DPDT micro-mechanical RF MEMS Switch (Length*Width*Height: 7.5*4.4*2.0mm)....
Details Add to List64 Gbps Dual DP3T RF MEMS Relay
MM5620
The MM5620 is a specialized relay that supports fast and high-quality signal switching for advanced...
Details Add to List26 GHz SP4T micro-mechanical RF MEMS Switch
MM5130
This is a high-power SP4T micro-mechanical RF MEMS Switch. Our innovative technology enables...
Details Add to ListDC to 18GHz Single-Pole Four Throw RF MEMS Switch
4AX
This SP4T RF MEMS switch is designed to handle high frequencies with low insertion loss (3dB...
Details Add to ListDC to 18GHz, SP*T RF Switch Module
MIXO
This is a customizable multi-pole multi-throw RF MEMS Switch Module with a frequency range...
Details Add to List3 GHz SPST (6 channels) micro-mechanical RF MEMS Switch
MM3100
This is a high power (25W per channel) six-channel SPST micromechanical switch offered in a 6.0mm*6.0mm...
Details Add to List1Amps SPST (6 channels) micro-mechanical RF MEMS Switch
MM1200
This is a 6 Channel SPST micro MEMS Relay intended for power and signal switching applications...
Details Add to List6 Channel SPST High Frequency Signal Relay
MM1205
This highly versatile 6-channel SPST High-Frequency Signal Relay, MM1205, is designed for switching...
Details Add to List - Download
-