B.T Frequently Asked Questions | Bright Toward Industrial Co., LTD.

Bright Toward Industrial Co., Ltd is a manufacturer of Solid State Relays, Reed Relays and MEMS Switches.. Manufacturer of Opto-MOSFET Solid State Relays, Reed Relays, and RF MEMS Switches. We mainly serve the Semiconductor Testing, ATE, BMS (Battery Management Systems), industrial machinery and Electric Vehicle industries.

Frequently Asked Questions (FAQ)

B.T - A manufacturer of Solid State Relays, Reed Relays and MEMS Switches.

FAQ

Frequently asked questions

Basic terms and principles of semiconductor solid state relays and reed relays.

Result 1 - 12 of 20

Both Opto-MOSFET Relays and Solid State Relays refer to a contactless design. Unlike mechanical relays or reed relays, Bright Toward's Opto-MOSFET Relays or Solid State Relays use either a MOSFET or a Triac...

Read more

Due to the contactless design, it is impossible for Opto-MOSFET Relays and Solid State Relays to operate without current leakage. With reed relays and mechanical relays, two physical reed contacts are separated...

Read more

Capacitance in our Opto-MOSFET Relay refers to the amount of electrical charge stored. The lower the capacitance value, the lesser the power required to drive the MOSFET inside the relay. TOWARD RELAYS’...

Read more

“Isolation” refers to the separation of the input and output of a relay. Better isolation enhances precision by minimizing noise. TOWARDs’ Opto-MOS Relays are optically isolated, meaning there is a true...

Read more

To ensure a stable resistance throughout the operation of TOWARD’s Reed Relays, not only do we measure the resistance value when the relay is entirely on, but we also measure its dynamic contact resistance...

Read more

Nominal Voltage refers to the normal operating voltage of the relay; Breakdown Voltage refers to the maximum voltage that an open contact can withstand before electrical breakdown occurs, also known as dielectric...

Read more

A low Thermal EMF Relay is designed with a chip to minimize the thermal offset voltage generated by the heat from the relay during operation. Please refer to TOWARD’s BMF series reed relay for great...

Read more

Hot switching refers to a circuit design that applies an electric load to the reed switch during operation. Hot switching is generally not recommended if you wish to extend the relay’s operational life...

Read more

Written by Ryan Hsu Three main functions in Battery Management System that uses Opto-MOSFET Relays:

Read more

Actuate Time, also known as Operate Time, is the time it takes for a relay to change from its resting state to its operating state after the coil has been energized. In other words, it is the time it takes...

Read more
Result 1 - 12 of 20

B.T - A manufacturer of Solid State Relays, Reed Relays and MEMS Switches.

Located in Taiwan since 1988, Bright Toward Industrial Co., LTD. is a relay supplier and manufacturer. Main products, including Opto-MOSFET Relays, Opto-SiC MOSFET Relays, Solid State Relays, Reed Relays, And RF MEMS Switches, etc.

B.T supplies relays to the world's semiconductor and automotive industries for over three decades and has long term long-term partnerships with OKITA Works based in Japan; Menlo Microsystems based in California; JEL Systems based in Japan and Teledyne Relays and Coax Switches based in California. Mainly serve the Semiconductor Testing, ATE, BMS (Battery Management Systems), industrial machinery and Electric Vehicle industries.

B.T has been offering customers high-quality Opto-MOSFET and Opto-SiC MOSFET relays since 1988, both with advanced technology and 30 years of experience, B.T ensures each customer's demands are met.